WORKPRO 4 in x 36 in Belt & 6 in Disc Sander with 6pc Sandpaper Belt Disc

Product Description

 

• 2 in 1 sander: This sanding machine includes a 4 x 36-inch belt sander and a 6-inch sanding disc with extra 3*belt and 3*disc, which meets your different applications, like wood. Woodworking will get a lot easier with the WORKPRO Belt/Disc Sander.
• Horizontal & Vertical: The benchtop sanding belt can be adjusted from horizontal to vertical providing different position for sanding work pieces of different shapes and size. Using the hex key loosing the positioning bolt and then adjust the position. Good helper for woodworking and all your DIY needs.
• Multi-Angle Sanding: The worktable can be tilted from 0°-45° for bevel sanding. A miter gauge increases accuracy , which is recommended for sanding small end surfaces on the sanding disc.
• Powerful Motor: This sander is powerful with 4.3 Amps 1/2 HP motor, providing 1900 SFM of belt speed and 3600 r/min.(RPM) of disc speed, which is more professional than other sanding machine.
• Good Design: The tension quick release lever helps you switch and replace sandpaper. Dust port allows a dust-free operation when connecting with a dust collector. Sturdy base can be well fixed on the workbench, ensuring the sander stays stable while you're sanding.

 

Manufacturer ‎HANGZHOU GREATSTAR INDUSTRIAL CO.,LTD Part Number ‎W125074AB Item Weight ‎40.8 pounds Package Dimensions ‎22 x 12.5 x 10.75 inches Item model number ‎W125074A Size ‎4 in. x 36 in. Belt & 6 in. Disc Power Source ‎ac Voltage ‎120 Volts Amperage Capacity ‎4.3 Amps Included Components ‎Belt disc sander, 3pc belt sandpaper, 3pc disc sandpaper

 

WORKPRO 4 x 36 in. Belt & 6 in.disc sander

The WORKPRO Belt Disc Sander can easily sand and smooth all of the splinters on your work pieces. With 1900 SFM of belt speed and 3600 r/min.(RPM) of disc speed, users could sand pieces more professional and efficient. Adjust the angle of the belt and worktable by your needs to to sand different types of work pieces.

The tension quick release lever helps you switch and replace sandpaper grits as needed. Note: pull the belt tension lever toward you to release the belt tension.

Turn the belt sander to vertical meets your different sanding needs. Note:using the hex key provided, loosen the positioning bolt by turning the bolt counterclockwise.

Sanding small end surfaces using the miter gauge, improving sanding work efficiency. Note: Turn the red knob adjusting miter gauge.

Installing/replacing sanding disc

 

1. Using the hes key provided, loosen the positioning bolt.

2. Move the sanding belt into vertical position,

3. Lock the sanding belt by tightening the positioning bolt.

4. Pull the belt tension lever toward you to release the belt tension.

5. Place the sanding belt over the drive roller and idler roller with the directional arrows running counterclockwise. Be sure the sanding belt is centered on both drums.

6. Push the belt tension lever back into place to apply the belt tension.

NOTE:

 

1. Please follow the safety instructions in the manual.

2. If any parts are damaged or missing, please contact with our online service.